A pillar gauges mounting

[booster seat]

I have a 3 gauge A-pillar. But i need to mount it to the stock A-pillar because it doesnt run all the way back to the B-pillar. I used to have one in my s14 but they guy that put it in just screwed it into the stock A-pillar and it looked like shii.. Im trying to thing of the best/cleanest way of mounting this. I thought about some double sided tape, but the stock A-pillar has a rough texture so i dont know how well the tape will work. Any ideas?

**Also it someone wants to trade their 2-gauge for my 3-gauge im down.. i traded the 3rd gauge lol.

 

[thabeast]

Screws is the best way to go even tho it doesn't look good. Double sided tape wont hold forever and With the weight of the gauges along With heat in the car They will fall for sure. An epoxy would work but you would have to hold it in place until it sets. On top of That if u ever need to remove the pod and or gauges its gonna be an issue. Screws are your friend

 

[Mr. Steef]

Just get some black finishing screws they have them in the cabinet hardware at the store. They have real small ones if your worried about it looking bad

 

[booster seat]

Just get some black finishing screws they have them in the cabinet hardware at the store. They have real small ones if your worried about it looking bad

i think that is what it's coming down to. And yeah i thought about some kind of epoxy but shit breaks and i will need to have access to replace gauges if i have to lol.