ESSAR not running right.

E

ElusiveDRFT

Spectator
Ok, so today, my car was running beautifully. Then I pulled into my friends work, and accidentally hit a parking stop going maybe 2 mph. Nothing major happened except the bumper being a little crooked... Or so I thought. I get in my car to leave, and driving through the parking lot I notice that the car is acting funny. Im sitting at the light, and the car is like dying.. revs are like fluxuating at idle like crazy. So i proceed to drive home, and the whole time im hoping i knocked a coupler off and it would be an easy fix... I get home, and start lookin around, and everything is fine. None of the pipes are loose, couplers have no holes / clamped down properly, and everything looks how it should. Im thinking my MAF sensor is going out, so i checked the connection and it connects fine, but still idles funky. Can someone please give me some good insight? Thanks!
 
benarovi said:
vaccum leaks ckeck all of em
Click to expand...

no. it's not that. SR's have 3 vacuum sources, brake booster, waste gate, and fpr. It's not a KA with 500000000 vacuum lines.

---------- Post added at 01:03 AM ---------- Previous post was at 01:01 AM ----------

instead of checking for vacuum leaks look for boost leaks. Chances are if you hit your intercooler it cracked somewhere of a coupler knocked loose and /or ripped.
 
s0loWkooPi said:
no. it's not that. SR's have 3 vacuum sources, brake booster, waste gate, and fpr. It's not a KA with 500000000 vacuum lines.

---------- Post added at 01:03 AM ---------- Previous post was at 01:01 AM ----------

instead of checking for vacuum leaks look for boost leaks. Chances are if you hit your intercooler it cracked somewhere of a coupler knocked loose and /or ripped.
Click to expand...

Im checkin for boost leaks tomorrow son, its too dark out.
 
You must log in or register to reply here.
Back
Top Bottom