I am stumped someone chime in

F

Florida240

Member
ok i just changed out my headgasket and rebuilt the head i plugged everything in and turned my car on ok it starts and dies shortly i checked for vac leaks and no problems. start the car again and same thing this time i unplug the maf sensor it starts right up and holds idle WTF i tried a diff maf sensor and it did the same thing with it plugged in...what could be the problem i am so confused
 
the maf sensor came off a working 240 the car is in time and i think i do have a vaccum leak is there ne one located in orlando
 
go to your nearest speed shop buy a vac/boost gauge plug and check what vac your running on
 
i can hear the leak arounf the throttle body i think it is the boot that holds the throttle body to the intake or something around there but can a vac leak do that to the idle like that

well one of the hoses that goes from the intake to a pipe on the intake manifold was ripped so i am going to change it and hope for the best
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom