ka to ka-t swap

[SilEightyS13]

I swapped a 96' s14 ka24de engine into an 89' s13 this weekend and i swapped the wiring harnes and ecu over w/ the engine but i can't get fuel or spark to work. So the engine will crank but it won't turn over, does anyone know what i can do to fix this?

 

[HellaSFLDan]

you have your fuel lines backwards? most common problem. if u dont have spark, make sure your ecu is plugged in alllll the way

 

[anxious_drifter]

your injector plugs arent in all the way

 

[SilEightyS13]

the plugs are in and the fuel lines are correct.

and the ecu is plugged in all the way.

 

[mikespeed95]

list off EVERYTHING you did to that motor, and that would probably help diagnose a problem on the internet, which is quite a feat.

 

[javidrifter]

maybe you didn't hook up all the power leads to the ECU

 

[Ka24coupe]

CHECK FOR INJECTOR PULSE WITH A TEST LIGHT. SEE IF THE FUEL PUMP IS TURNING ON. TURN THR KEY TO THE ALL ON POSITION AND PUT YOU EAR TO THE GAS TANK PUMP ACCESS SPOT. SINCE YOU ARE USING A NEW HARNESS YOU PROBLY DID HOOK UP THE FUEL PUMP. I CAN BET THATS IT FOR YOUR FUEL PROBLEM. AND YOU NEED TO CHECK FOR A SPARK. IF YOU NEED MORE HELP JUST START WITH THE FUEL PROBLEM FIST. IF YOU GIVE ME A CALL At 954 675 3213 my name is paul and i can help you better on the phone