Search results

To run z32 you have to use SPL outters, correct? I dont have 300$ to dump on them at this current moment. But I do want to get rid of the bumpsteer, that causes them to bend.

Other than the fact that they bend, there is nothing wrong with them. This is my second bent OEM tie rod.

Well out street drifting the other night, I hit full lock pretty hard and bent a stock inner tie rod. Now I'm using this as an excuse to upgrade, so what are you guys running as far as aftermarket setups?

This.

Awesome dude, met up with me on time. Drove all the way up to tampa, no haggling or bullshit. Came with cash in hand, deal went smooth as hell. A+ deal/dude

I don't think you understand english so well. This shim that your adding is for adjusting the VLSD, not for making it lock. I read this write up, then tried with with double the factory shim. Then tried it with a barely over sized shim. They did not make the diff lock harder, because it is THE...

Why do you people refuse to listen?

This doesnt help the diff lock harder, the locking is all done with the fluid inside of the viscous unit. This is another one of those myths, that people randomly think up and call it genius. The shim is meant for adjusting the diffs position, not its locking capabilities. Buy a welded or a 2...

I have had 2 rx7s with a kAAZ and now my coupe, I don't run kaaz fluid.

I have personally tried this, with a fresh s14 diff with 63k and a s13 hicas diff with 140k. This does not work at all, it just made the diff fade out a lot faster when actually using it.

They are listed forsale now.

Why do you people run such tiny tires on 15s? You know you don't drive corollas with 43rwhp right?

Or run a 205/55 and have both? Not only that, 205 on a 8 is a stretch. Albeit not a lot, but it is a stretch.

16x8 -10 205/45/16 (gonna jump to 205/50) all around, alignment specs = eyeballed They are just temporary wheels, because I just went 5 lug. But they fit just fine for stock body. there is no reason why you should be running that much camber out back, your wheels only sit 3mm more...

jut go to a different tire shop, I run 215-225 on my 10s..

Ha yes.

330s on 13 psi is stupid, even on a baby t25. 550s or bigger, because if you creep past 12 psi on a t3 on 330s. Say good bye. 550s, z maf, enthalpy tune, done. And stock injectors are 270cc.

centerforce stage 2 or dual friction, ran one on a ka-t on 14lbs on a t28. Never slipped, and I drove that car like it was a racecar.

I dont get how you guys are breaking studs, I have autozone/advance/napa studs in my car. 16 of them, with slip on spacers. Never broken one, I dont understand....

I really hope your not talking to me, because if so you're a moron. I was referring to the fact that people have done it before, so they will fit. That was his question after all.