Search results

to each is own but i was always told that running no thermostat was a bad idea, the car will never reach correct running temp. this isn't a big problem when its hot outside but when its cold.

s14 down pipe will not work i had one fro AUS that was made to clear the stearing shaft for LHD cars.

lol I missed that one..

no the block wont push water into the coolant over-flow that only happens when the car is over heating. if your worried about the block do a compression test or a leak-down test.

If your coolant overflow tank is filled with water that means that your car is over heating. could be many things. 1. bad water pump ( check if its leaking) 2. blown head gasket. (you would see alot of smoke) 3. bad radiator cap (you would need to rent a tester from the auto parts. 4...

the only sub-frame that will work on and S chassis is a r32 sub-frame. if your going to use a r33 subframe you need to use syko performance motor mount kit. this kit is a bit pricey$$$

you don't need to take out the fule pump to see if your getting fuel. just open the fuel pressure regluator. lol you beat me to it. ok you might not be firing fule from the injectors you'll need a test light to check them.

looking for a place in miami someone told me to to try a boat store..

Guys i need a 6 gauge Butt connector anyone have an idea when i can get one localy? i tried the autoparts no luck.

Why do you think the flywheel would be the problem? if your gears are going in the the clucth should be engaging. is it the same tranny that you have always had? or did you change it.

I hate to say this but i think your going to need to take the tranny off to see if you put somthing in wrong.

That happend to a sr20 i did a clucth on it was that we put the wrong throw out bearing on. you could have put it on the wrong way.

you do not need a spacer many people use the stock s13 bolts and call it a day. thats what i did. the only thing that you should really do is change the ball joints to s14 one ( this is only if you have a s13.

enjuku racing might have some of that stuff in stock.. if you shop around you get better prices but if you need it fast your screwed.. Good luck on your hunt :bigthumbu

Most if not all manifolds where made for skylines so they wont fit right in s chassis. Your better off having one made or saving your pennis of giving away your first born for a fullrace one.

bend with a hammer what ever you left thats what i did.

i think on zilvia they have a really nice write up on doing it in a s14

i'm sure you can get an ss line that can be ran all the way across. i dont know anyone that makes one that will do what you want. you might just need to buy the dohc one's http://driftday.com/frames.htm hey hey theres only room for one vert with an rb in miami :mad: ... lmao

i have heard that s14 radiators fit but you need to cut the clittel rubber mounts that hold the radiator. Nice link

just here to help out others man. but i stole the pic from the rb section on nico