Search results

Forza 3 noob my gf just gave me the new forza3 Drifting wise is good for practice(compared to the real life)? Do i need the wheel or at least you recommend it, if so wish one should i get. What is the best track to practice. Before flame my thread, i went to...

Any ideas on how maybe a write up? parts involved? need to fix this asap, thanx

No upgrade yet!100% stock, no leaks, i did not remove the calipers so there is no chance of wrong position, (bleeder valve is up). at this point i just get the pressure from the springs but it does not built any hydraulic pressure no even at the mc, i pump and pedal goes all the way to the...

yes my friend is helping me with the bleeding as u describe, and also yes the shims in the front pads the 3 (outer shim, inner shim and shim cover) are missing. under the damn car....lol im in wpb zip 33413 why?

yep i got th fsm the problem is no pressure at all.... no even in the master cylinder, well looks like i need to replace it, S13 will work? there is any difference between auto and manual? when i bleeding i notice that there is no shims, how bad is that? thank you guys

yes it was working before i bleed it, how i could kill the mc? do i need to get a new one or it could be rebuild?, may i use one from an S13? is the same for the manual and auto? thanx

Brake problem in my s14 The problem start with a very large pedal travel (the pedal had to go almost to the floor to stop), but as I drive the pedal goes up, as a matter of fact it seems that tries to stop the car. So I figure maybe is air in the system so I start bleeding the circuit (FR)...

does any1 actually is using MR tension Rods? comments?

if you remove the catalytic converter you need an O2 sensor dummy am not really sure but with out that you gonna have a CEL, btw some1 knows were to find it?

+1 1000 to 2000 grit

Hi, i have an s14, and i want to install a 300zx n/a vlsd, question, is there any modification necessary?, the J30 axels will work to complete the swap?