Search results

ok so im planing on buying a set of rims for my e36. the suspension i have is currently h&r springs on bilstein struts, on rolled fenders. the rims im looking at getting are 16x9.5 offset unknown but it is a 3 peice forge rims with a 2 3/4 inch lip, offset according to the guy is between +20 and...

hey guys so today i woke up to a weak clutch i felt like it barely had any pressure. and as i drive away (still in my neighborhood) the clutch gave out. i press the clutch and goes straight to the bottom and doesnt come up. there no pressure what so ever. yesterday i drove the car perfectly fine...

Hey guys what are the symtoms of your motor knocking??? would it knock only on idle? all the time? how loud? my motors making a weird noise and im worried :/ I have researched and asked a few people and i have been told it could be lifters or loose screws on the cams??

so i go to start my car today and for some reason it didnt start. when i went to go look at the battery or just under the hood in general the EGI fuse was making a buzzing noise. anyone know what the egi fuse is for and why it was making that noise??? s13 obd1 so everyone knows

ok so when i first bought the car it had one cambered wheel for some reason. i took it to the alignment shop and they told me replace the: lower control arm ball joint, outter tie rods and the rack boot, and tension rod bushings. so i did all.......the pictures there are after the instalations...

hey guys, this isnt for my car its more for my friend. he has an s13. lately the car has be getting out of first gear crappy like it takes long to grab and go. the other day he was driving home and it completely stopped pulling, like a regualr stop at the light he put the car in 1st gear and...

Hey guys soo i had removed emissions on my ka and pluged up the egr hole with a couple of coins and extra jb weld and today while driving pressure popped it right off, now honest;y i was tol to do this and it would work but ...it didnt. anyone no a solution to plugging it up my car sounds like a...

So today thanks to ronch timing my car i got it started up when i finally terst drove it i had a minor problem......so i most likley misplaced this cable but when i turned the car off the cable i had placed to the alternator was frying sizzling cooking.......where else would this cable go if...

So i just finished droping in a 96 ka motor into my 92 coupe...everything is good to go i timed it following the diy. the motor turns over nicely like if it were going to start but it just keeps turnng over it doesnt want to start anyone have any ideas what i might be missing or doing wrong...

Any one know where these two grounds go. these grounds are by the alternator, one of them i had labeled befor i pulled it out as the starter ground. could i just ground it anywhere? the smaller one is the one pissing me off it doesnt fit anywhere. any ideas? and third.....this line comes...

i just swapped in a 96 ka into my coupe but.....where do i refill the tranny fluid? ...yes noob its my first swap and went very well..:bigthumbu

Bought a piar of lower control arms , good price, good conditions, good guy quick and easy thanks man

So im swaping my motor, everything is good to go but........as i put the manifold back together i have 4 random hoses that for some reason i did not label very well and do not know where they go too. i know the pictures suck but ill try describing where they are located and if you guys can...

Right under the oil filter to the bottom right to be more exact there is a little tip, this is on an s14 motor. my s13 motor doesnt have that is has like a plug thing. any one have anyidea what goes there or if its even usefull?

ok so my 92 kade went out, i came up on aa 96 kade and yes some of you are going to tell me how much this topic has been beat to death, but...... iv been told i can keep the s14 manifold. when i went to try out my s13 harness alot of the plugs didnt match up. now my question is....behind the...

so i pulled out my 92 ka and basically just kinda stuck because my new motor is a 96 ka and the manifold and hoses are setup differently can someone tell me whether i can use the s14 manifold or do i have to swap my s13 mani onto the block???? and does anyone have a diagram for the hoses on the...

Soooooo.....everyone in miami knows it was pouring last night and idk how but i guess i hit a major puddle and water sucked into my engine, luckily from the looks of it it only got into piston 1 all the others were dry. :( left the car today at a friends, any idea how major this can be??

Im having a major problem with the engine its a kade we just finished putting back on "time" and it starts, but it shuts off after a bit, and if we try to rev it and hold it at....let say 1.5k or 2k it hesitates to stay at that rpm. when it drops to idle it stutters and shuts off. any idea if...

Ok so i think i kinda have an idea of what it is but i need some more input befor i start taking things apart. i recently changed the oil on my s13 and i ran it pretty hard today on the way back from downtown, its been about a week since the change and when i finally got the the street cruising...

Hey guys recently theres been some clicking going on under my valve cover, and even more recently wheni start the car it makes a loud ass sound and once i start driving it goes away but the clicking remains. iv been told it can be the timeing chain guides and iv been told to replace them or...