300ZX Brake question (that hasn't been asked)
- Thread starter souless
- Start date
SilviaDrifterX
Member
I think alchemist xl did it, check with him...
TurboDreams954
Spectator
he used a 5mm spacer i believe and they cleared fine.
Alchemist XL
Driver
http://www.sfldrifters.com/forums/showthread.php?t=6
theres the link to the original thread. and there are 2 different types of SE Alloys, they look exactly the same from the front but when you turn them over they are completely different. One set of them allows you to get away with just a 5mm spacer, and the other type I'm not sure exactly how much more you need to go, I tried 15mm on it and it still didnt clear. The difference between the two SE types is behind the spokes on the rim, it'll either hit the caliper or clear the caliper with 5mm spacers depending which wheels you have. I just figured that out a couple weeks ago when I swapped front tires, I was like wtf how come they arent fitting?!?!?! then grabbed my other se I had up front and compared them and found that info.
theres the link to the original thread. and there are 2 different types of SE Alloys, they look exactly the same from the front but when you turn them over they are completely different. One set of them allows you to get away with just a 5mm spacer, and the other type I'm not sure exactly how much more you need to go, I tried 15mm on it and it still didnt clear. The difference between the two SE types is behind the spokes on the rim, it'll either hit the caliper or clear the caliper with 5mm spacers depending which wheels you have. I just figured that out a couple weeks ago when I swapped front tires, I was like wtf how come they arent fitting?!?!?! then grabbed my other se I had up front and compared them and found that info.
Alchemist XL
Driver
No prob, if you run into any trouble let me know