300zx brake upgrade

S

s14drifter69

Member
hey guys what's up im traying to do a 300zx front and back brakes upgrade and ill like for you guys to post pictures and how tos for the e-brake I noe u will need another calliper for that plz help me put thanks
 
google it z32 brake swap

all the info is there and you need the whole rear brake setup backend plate,shoes and hardware,rotor

if you want to have an ebrake you need r33 skyline cables you can get it from www.mynismo.com
 
Its all bolt on if you have the right parts. I used a r33 ebrake cable from the link DRIFTER s14 posted up above. Made everything simple. I would recommend also upgrading your master cylinder.
 
Tonymac said:
Its all bolt on if you have the right parts. I used a r33 ebrake cable from the link DRIFTER s14 posted up above. Made everything simple. I would recommend also upgrading your master cylinder.
Click to expand...

correction--drftnr14~:bigthumbu
 
s14drifter69 said:
but does ne 1 has pictures on how to or no?. and thank guys
Click to expand...

I really don't know what you'd need pictures of. If you can take the old assembly off, you can put the z32 hardware on. It all bolts up exactly the same.

If you have an s14, you use r33 ebrake cables

If you have an s13, you use z32 2+2 ebrake cables
 
hey drftnR14 were i can get a 5 lug hubs for my s14. i wanna buy them by the 4th of december to do the 5 lug conversion. i looked up on ebay but idk if they good or not. everything comes out to 470 with 5 lug hubs bering drill rotors and brake pads.
 
mynismo.com haha

You can get them really anywhere. You're lucky to have an s14 b/c you don't need "conversion" hubs from China which have been known to have premature bearing failure.

What I did is get OEM s14 hubs/bearings (1 assembly) for the front and rear. Its really easy to 5-lug an s14.
 
the ones on ebay are pretty good the whole set goes for 350-500 depends and just redrill ur rotors to the lug pattern that the 5lug has
 
You must log in or register to reply here.
Back
Top Bottom