After I removed the head...

G

Get Slidewayz

Spectator
So I removed the head today and found all my pistons printed with valve marks on them

2pqlvyf.jpg


ncmwed.jpg

2r7st3a.jpg

141qdcj.jpg

sxndwg.jpg


Spare head not sure if valves are good??
scgub9.jpg

s5918m.jpg
..


So i need pistons rings valves, springs, guides? Not sure if I should rebuild
 
Wanna say it looks like timing belt was off a tooth or so on the cam gears. Can't think of much any other way for valves to hit and bend like that.
 
god thats just not good. did the timing belt take a shit on you or something?

edit ok i saw your other thread and wow thats lame, i would say take it to that shop that fucked your shit. but if not get that "new" head decked and hot tanked cleaned up and shit. you could leave the pistons i guess if it was me i would rebuild that motor cause who knows if the bearings are gonna be out of wack.
 
Last edited:
yea the tensioner bolt broke in half cause my belt to come loose and my cams spinning freely.. If i could use the block the way it is Ill just redo the head
 
Damn those pistons hate life like i told you before just get a longblock and call it a day.
 
Ok where am I going to find one? JDM of miami dont import these no more. What I was planing was clean the spare head and slap it on. And Ive seen ppl use pistons like this before.
6fr1aa.jpg


Thanks guys Im gonna clean up the head or rebuild it not sure which direction im going but id love this thing to be running again
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom