Brakes

intheskywithpie

intheskywithpie

Spectator
:D while i was geting new street tires today i had them check out my breaks; which i had a feeling woulden't be good since nothing on my car is (stupid ricer). anyway i wanted to do a 5 lug swap but it dosen't look like its in the cards now, so i'm wandering if there are any 4lug break set ups or kits for all 4 wheels, all i can find is front kits.
 
Last edited by a moderator:
q45, j30, and z32 are all good brake up grades you just need get the rotors meant for the brakes drilled into 4 lug which rick (240SicknessX) can do. you just have to pay him.
 
i think i'm gonna do the stoptech stage kit, since it fits under the stock calipers and is pretty close to my price range. then if i do end up five lugging later i'll do the 32 or r33 conversion.
 
dude...

$450



30mm z32 calipers from junkyard - $44.
red engine enamel paint from advanced - $5
peice of sandpaper for nissan symbol -$1
brake upgrade kit from heavy throttle - $400
having stopping power to keep you from wrecking your car - Priceless


use the extra $1000 you were going to spend on stop tech's and buy a two way lsd and some tires.

heres the link for the upgrade kit. everything bolts on to 4 lug. all brembo stuff, nice.

http://www.heavythrottle.com/

go to brake upgrades/brembo z32 uograde kits/z32 30mm front and 240sx rear $415.00
 
the stop tech is only 400 bucks, its just pads, slotted rotors, stainless lines, and fluid. i'll check into the kit from heavy throttle tho.
 
$400 for rotors and pads thats crazy lol u wont increase yo stoppin power with out calipers then those stoptechs are like $1500




JeepsteR118 said:
finally has something smart to say ^^ lol
Click to expand...
and YOU shut your mouth gorda im pissed at yall but ill get over it abraham's comment in my sig kinda made me change my mind lol
 
your right what i mean is for all that for $400 it wont increase your braking as much as a z32 brake conversion would
 
i don't really want to increase it too much, since i intend on doing a 5 lug eventually, at the moment i just want to be able to stop without fear that i'm not going to.
 
then just fix your brakes whats wrong with them your pads lol wait till you go five lug and opt for a z32 conversion thats what i would do w.e.
 
intheskywithpie said:
i don't really want to increase it too much, since i intend on doing a 5 lug eventually, at the moment i just want to be able to stop without fear that i'm not going to.
Click to expand...

these bolt onto 4 or 5 lug so there you go. problem solved by Sherlock_Dorian.
 
dude use infinity M30 rotors=4 lug + maxima calipers and you are set, thats the set up I am running on the front with ceramic pads and you can ask whoever is driven my car, it brakes nicely
 
DUDOCIUS said:
dude use infinity M30 rotors=4 lug + maxima calipers and you are set, thats the set up I am running on the front with ceramic pads and you can ask whoever is driven my car, it brakes nicely
Click to expand...
^^ another good budget-friendly option...
 
You must log in or register to reply here.
Back
Top Bottom