Brakes

^^ why you pissed? nigga you know i love you....when ever your down i am down to make out


on topic: if you got some extra flow now, i suggest get the z32 upgrade now and use the 4lug rotors if need be cus that way you get one thing partially out of the way so less money later on.
 
JeepsteR118 said:
^^ why you pissed? nigga you know i love you....when ever your down i am down to make out


on topic: if you got some extra flow now, i suggest get the z32 upgrade now and use the 4lug rotors if need be cus that way you get one thing partially out of the way so less money later on.
Click to expand...

que clase maricon dios mio!
lol but yuh what dis puta sucia said ^^^^^^
 
cause my rotors are bad too.

the guy that owned my car before me apparently thought he was an open diff tsuchia.

yeah i'm broke right now; and i'm like 200 bucks from paying the credit card off. then i'm gonna start looking into it heavily, i just wanted to know my options.
 
Last edited:
DUDOCIUS said:
dude use infinity M30 rotors=4 lug + maxima calipers and you are set, thats the set up I am running on the front with ceramic pads and you can ask whoever is driven my car, it brakes nicely
Click to expand...

What year maxima calipers did you use. and are they bolt on with no mods?

What other nissan calipers fit the 240sx with no mods???? I NEED A BRAKE UPGRADE!!! :bigthumbu
 
jdmnismo300 said:
just do the ttz32 i believe all u need is to redrill the rotors and brake lines for the calipers check nico
Click to expand...
yeah i checked nico last night and the 4-wheel z32 mod caught my eye. now i just need someone to part one out or to find one at the shithole of a junk yard i've got close by
 
yeah i'm gonna hit a junkyard with my friend hopefully sometime in the next few weeks to see what i can hit up. what about the r32 conversion has anybody done it or know where to get the parts (i realize its not cheap but its oh-so jdm tyte)
 
dude just get m30, cheap and works with the sock lines, also early 90's Maxima calipers work good too, plus for some reason maxiam have a fairly decent after market backing... I am running on my set up M30 cross/slotted rotors, with Maxima calipers. hawck ceramic pads and the stock lines. the m30 rotors are a good half an inch bigger than the OEM 240sx rotors, you can also go q45, IMO Z32 brake swap is good but if you are in a budget go with a cheaper set up, and it i remember right the M30 brake swap is the same that is found on the 180sx type X (i am not too sure, but i think it is right) lol. peace
 
i'm gonna play my options for a little bit. worse comes to worse i get a decent set of pads and save up for a while to do a z32 swap.
 
what model nissan calipers fit the 240.? i know s14 and 300zx and i also heard about the early 90's maxima. is there any other brakes? i know the r32 could but i need cars that i could find at the junk yard. knowledge is power!!!! :bigthumbu
 
... this thread already exsits with pretty indepth convorsation. i'd check it (the last thread i started you can find it in my profile).
 
quit being a pansey kerry and just go for the Z32 brakes. Im going to do that after im swapped and get rid of the Q45 brakes...Z32= 4 pot= Huge stopping power....now stfu.
 
You must log in or register to reply here.
Back
Top Bottom