Evo brembos on a 350z

Hectorious

Hectorious

Spectator
I bought a pair of evo brembo calipers and plan to put them on my 350z
the easy part is that the bolt pattern on my z and evo are the same 5x114.3
so really with evo brembo rotors and pads I should be straight..
Getting the calipers to bolt up is the hard part..

So if anybody has any experience with the same setup or know anyone who can custom fabricate me an adapter please help.

Any possitive feedback or opinions will help
 
you are gonna need custom conversion brackets, being that no one uses evo brembos on a z33 since there are already brembos that bolt up, you are gonna have to make it yourself.

Material wises id use at least 5/8 aluminum or 1/2 steel since you would be making them yourself.
 
lol are you trying to run them on a 350z?
the guy i bought these from told me there was another guy on this forum who bought a set and was gonna put them on a z..
i was wondering if he ever managed too...

im gonna buy evo 8 rotors and and evo 8 pads...
pretty much from there all i'm gonna need is to run brake lines and an adapter to bolt on the calipers..idk if the calipers are gonna clear the dust shield but thats something im gonna have to wait and run into when i cross that bridge

if it gets to difficult.....
sure i'll let them go for no less then 345..
i got them for 300..but buying the extra shims and screws it was missing from mitsubishi cost me 45
 
Last edited:
Hectorious said:
lol are you trying to run them on a 350z?
the guy i bought these from told me there was another guy on this forum who bought a set and was gonna put them on a z..
i was wondering if he ever managed too...

im gonna buy evo 8 rotors and and evo 8 pads...
pretty much from there all i'm gonna need is to run brake lines and an adapter to bolt on the calipers..idk if the calipers are gonna clear the dust shield but thats something im gonna have to wait and run into when i cross that bridge
Click to expand...

Who is the guy u bought them from..
 
Hectorious said:
http://www.sfldrifters.com/forums/showthread.php?t=51281&highlight=brembo
Click to expand...

I use my phone to take the pics, it look like crap..dat's the same guy who i bought my brakes from.
Brembo.jpg
 
Last edited:
in three weeks i should have bought my pads and rotors...
if your interested in making me some adapters for my calipers..
im more then happy to pay you for your time..
 
I installed evo brembos on my hatch today. I gotta say, they do look very nice. I just have to bleed them again. You should look up Evo Big Brakes on zilvia. I believe that they have like a diagram of the brackets for the 240sx. All you will have to do is measure and then size up where the holes will be on the bracket. If you want pics of the evo brembos on my car let me know.
 
You must log in or register to reply here.
Back
Top Bottom