FMIC install help

M

mkiriakopoulos

Banned
Just got my FMIC kit in the mail. silly question but you know on the S13 SR20DET how there's the vacuum line that goes from the wastegate to one of the intercooler pipings? Well where do i relocate that line? Do I have to weld a small port to stick it on there? or can i run it to that vacuum port that sits under the throttle body? help? \=
 
no trick's tricks are for kids lmfao..

you can use a smaller battery or relocate it. you can get a miatta battery, an odyssey pc680( :bigthumbu )..

you can also relocate it but IMO to much work for nothing
 
hes right in the middle of my swap the small batterys were on backorder so i just cut it imo i would just relocate to trunk
 
mkiriakopoulos said:
how much is the odyssey?
Click to expand...


not cheap my last one was 300 bucks but lasted 3 years, had 520 cold cranking amps, and was leak proof or whatever and could be mounted upside down if need be.
 
DrumFunKen said:
not cheap my last one was 300 bucks but lasted 3 years, had 520 cold cranking amps, and was leak proof or whatever and could be mounted upside down if need be.
Click to expand...


they are dry cell batterys $300 you got raped but that was 3 years ago...

if you go on ebay they have pc680's for $110 w/o the terminals. i bought it new for $150 from my frineds shop.
 
You must log in or register to reply here.
Back
Top Bottom