KA24de timing issue/ vacuum line problem

S

Scorpion_s13

Banned
ok so i went back to step 1, i checked the cams both lobs aim opposite 6 chain links between each cam position point, the dizzy is right because the car does turn on, everything still running like shit, now im thinking it has to be a vacuum problem i thought i put them all back where they suppose to go but now doubting it, any input will help i live in NMB if anyone wants to stop by and try to help , im starting to give up on this getting discouraged the only thing that has be going is drifting. :confused::mad::chair:
 
Tps sensor........maybe........injector leak......maybe.......idle air......maybe.

Check all your gaskets and shit start over again sir.

---------- Post added at 08:18 PM ---------- Previous post was at 08:16 PM ----------

also is this a rebuilt ka? Or just a swap?
 
it sounds like it could be a vaccume leak
go to a parts store and buy a can of brake and parts cleaner and spray your intake gaskets and all other areas where vaccume would be present and if your idle changes you found a vaccume leak
 
You must log in or register to reply here.
Back
Top Bottom