imarkspeed
Member
check the spark plug wire coil . it happen to me once
Massive Help!!! Please Help!!!
- Thread starter scarface_613
- Start date
scarface_613
Member
im in tampa...appreciate the offer but at this time no $$$...if worse comes to worse ill def hit you up if you wanna make a trip out here lol
seriouss14
Member
ignitor?
dammn to far
scarface_613
Member
sorry for the late reply..yea i hear you...well as of now adjusted the timing the best i could to the red mark on the crankshaft...ordered a new crankshaft position sensor should be here soon...could it be that my whole engine harness needs to be replaced...
I think besides all these ideas ppl are giving you, which are good leads.
Check the Distrib, if the cables are fucked it wont get power.
Check or have someone, Check your timing.
Make sure ECU is powered.
Since cable has been fucked with, check harness for bad splices/ connections.
As well as any open ended cables or shit that could cause a short circuit.
I think this is pretty much what ppl have been saying, and if you have replaced everything else this should be it.
GL man
well i had a issue with the CPS in my car, and yes this sensor will not allow your car to start.
and it may also may turn off your car at random. ( like it happened to me on 137ave)
But as far as i know, having a bad CPS will throw a code on the ECU, so go to Autozone and have them check it out ( for free as long as its OBDII port)
Check the Distrib, if the cables are fucked it wont get power.
Check or have someone, Check your timing.
Make sure ECU is powered.
Since cable has been fucked with, check harness for bad splices/ connections.
As well as any open ended cables or shit that could cause a short circuit.
I think this is pretty much what ppl have been saying, and if you have replaced everything else this should be it.
GL man
well i had a issue with the CPS in my car, and yes this sensor will not allow your car to start.
and it may also may turn off your car at random. ( like it happened to me on 137ave)
But as far as i know, having a bad CPS will throw a code on the ECU, so go to Autozone and have them check it out ( for free as long as its OBDII port)
Last edited:
scarface_613
Member
im gonna recheck everything again as soon as i can...but i would be happy if this car would make it to autozone...doesnt start
Is it throwing a code?
Here is a diagnostic table, explaining:
http://www.240sx.org/faq/articles/ecm_codes_doch.htm
if its the CPS, it would be ....
Crank Position Sensor (OBD) 82 EC-167
check it on the manual how to find the code.
gl
Here is a diagnostic table, explaining:
http://www.240sx.org/faq/articles/ecm_codes_doch.htm
if its the CPS, it would be ....
Crank Position Sensor (OBD) 82 EC-167
check it on the manual how to find the code.
gl