darkmindnisismo
Member
hey im bleeding my clutch i chang my slave cylinder and i have been bleedin the dampener and the slave and it stell have air
Neeed help bleeding my clutch
- Thread starter darkmindnisismo
- Start date
milkyninja
Driver
make sure the clutch line is okay. you have any pressure at all?
milkyninja
Driver
how can u do it by yurself?
steveka-t
Driver
just wondering, its not hard bleeding it with someone else. but by yourself its kind of a headache.
if your not getting any pressure, pump the clutch then hold it down, open the valve to let the air out and repeat until you feel that all the air is out, make sure you have fluid in your clutch reservoir.
boxmod
Driver
valve closed... pump pump pump pump until some pressure is built... hold down.... open valve/purge air... close valve
repeat until its a heavy and pure steam of luid shooting from valve upon purge.
be sure to make sure resevoir doesnt get low on fluid after a few loops or youll suck air back in.
repeat until its a heavy and pure steam of luid shooting from valve upon purge.
be sure to make sure resevoir doesnt get low on fluid after a few loops or youll suck air back in.
darkmindnisismo
Member
it was too ppl and doo i open and close fast ?? or doo you let all the fluid come out then you close it???
steveka-t
Driver
let some come out untill you see a stream of fluid and no air
darkmindnisismo
Member
kk ima try that now
Do it in order. Learn English first and THEN learn how to bleed a clutch.
Get rid of the damper box while your at it
This. You may also have to bleed the damper box