Ok decided to upgrade

[Hektic]

Aite so i did decided to upgrade my t25 to a s-14 t28 turbo. So i would like to know wut i need for this swap???? I know i have to get my intake and hotpipe modified. But i noticed kits out there dat allow u to rock da same shit.Anything else i need to know??? plz any info is helpful. thanks

 

[NissanGuyB14]

depending on the power jump u might need bigger injectors, if u still have the stock 370s, if in not mistaken they are only good for 250whp at 3 bars and 290whp at 4 bars

 

[BiG MiKE]

You dont need a restrictor - u have the STOCK BANJO BOLT like i told you earlier meatwad - Turbo, Adapter plates or w.e., and tune til u MAX out the injectors if ur avoiding buying new ones

You may have to modify the oil drain to work - chop, clock, weld SMDG FTW

 

[Hektic]

notice wut time i posted this mike....... i posted this before u told me about the banjo bolt douche. any other info is welcomed

 

[Chris Jackson]

depending on the power jump u might need bigger injectors, if u still have the stock 370s, if in not mistaken they are only good for 250whp at 3 bars and 290whp at 4 bars

Ok whell 3 bars would be over 45lbs of boost and if u only make 250 there's a problem but the motor will blow at 3 bars and 370s are no where near good enough.

Also you don't want your injectors on %100 duty rate juat upgrade both the turbo and injectors

 

[Becker-Racing]

You dont need a restrictor - u have the STOCK BANJO BOLT like i told you earlier meatwad - Turbo, Adapter plates or w.e., and tune til u MAX out the injectors if ur avoiding buying new ones

You may have to modify the oil drain to work - chop, clock, weld SMDG FTW

mike its ok dude....hes a messican we can let it slide lol

 

[NissanGuyB14]

Ok whell 3 bars would be over 45lbs of boost and if u only make 250 there's a problem but the motor will blow at 3 bars and 370s are no where near good enough.

Also you don't want your injectors on %100 duty rate juat upgrade both the turbo and injectors

I was reguarding fuel pressure, not boost. I don't know too many people who run 3(44psi) or 4(59psi) bars of boost...

 

[Hektic]

any more useful info on this upgrade????