Power Windows.??!!!?!?!?!?

2

240MANSX

Member
HOW DO I REMOVE THE BOLTS ON TOP.

GFVFTVFT.jpg



WHEN I REMOVE THE BOLTS. THE THREAD STILL HOLDS THE WINDOWS IN PLACE. IF ANYONE HAS EXPERIENCE WITH POWER WINDOWS THEN THEY KNOW WHAT I'M TALKING ABOUT.. WHAT DO I DO????
 
I have to replace the drivers side window motor and track on my car soon. I dont remember those specifically can you get a pair of pliers or channel locks on them from the backside?
 
ive doen it a few times technically your suppose to remove your window 1st then with a little force you can take it out ive takin it out with the window and all but its easier wen u take the window out 1st then the whole assemble
 
first roll down the window all the way and ..... take the 4 bolts that hold the window.. if u cant roll the window down find a wrench that can fit thru to take them all out out... your going to see a white thing that supports the window it look like something soft take that out it gives u room to work with....after u done that the window should be all loose and wiggly.... the thread of the window should come out of the hole....when trying to take the window off try tilting it window forward in order to get one of the stoppers out then the second one ( 2nd stopper u have to force it thru) after u taken it out your going to see 2 bolts in the top and another 2 bolts in the bottom take out the 2 in the bottom first( u should see them directly they are visible in the picture "Regulator assembly adjustment")than the other top ones after u take those out the regulator should pop out of the holes and ur good to go..... the screws that hold the power window motor can EASILY BREAK!!! dont try to take them out with a screw driver....get a small chisel and a hammer and try loosing them wit it....i saw this done easily from a mechanic in upick i learned something that day... :bigthumbu
 
You must log in or register to reply here.
Back
Top Bottom