problem with the rear end on my s13

[3ddimension]

i put a non turbo 300zx sld in my 1990 s13 hatch, ever since then when i gas it through a turn (not to drift but to pull into traffic or just racing around) my back end violently shakes. also i have a s turn coming home to my house if im doing about 50 or better in the turn it will dew it there to. i have no suspension what so ever completely stock. what i do have is: rebuilt engine, headers, side mount exhaust, cross drilled rotors, nismo motor and tran-e mounts, spl metal subframe bushings, and a 300zx rear end. my friend thinks its because i don't have susp. so the center of gravity is still high so going into a turn when not drifting is pushing all the weight on one side raising the tire slightly. i dont know ? help please?

 

[KeysSr]

is everything tight

 

[3ddimension]

yeah

 

[benarovi]

what rpms are you at when you are in the turn? or u just have the clutch in

 

[Damian P]

did u fill it with gear lube 75w90 or 80w90 and did u put an additive ?

 

[3ddimension]

rpm 4 to 5000

yes

i had it done by a pro, when im drifting and doning dounts it works fine but as soon as i just want to power through a turn with some speed it will shake

i'm logging out!

 

[Moe@240SXWarehouse]

Let me know if you need any help

 

[IThaJokaI]

tell your friend hes a moron, it has nothing to do with stock suspension. Stock hicas 240sx's came with an lsd.

Miamigetlow, it would be a VLSD which is closed and doesnt require additive.

You need to get back under the car and make sure everything is tight, and make sure the diff isnt broke.