S13 info needed?

HellaCaliJosh

is hungry
Driver
seat belts and the module removal for the belts. is there an issue or and a solution.

can we get a front bumper removal DIY asap. somehow i always do it the hard way.
 
DIY , step one : don't be a fucking pansy

step two : rip that motherfucker off

step three: don't waste your time on the internet and do it
 
i just took off my front bumper in 7 min its easy, i will show you. to remove the auto seat belts you have to take off the head liner. oh and BTW for those of you who want to take off your auto seat belt, you will need to get a head liner from a s14 i belive, cause there will be a gap there where it was and it looks like shit. if you care.... i know you dont josh.

ok if you want to know how to take off the front bumper i will tell you here. first take off inner fender on both front wheels. then look in there you will see about 6 or so 10mm bolt that hold the fender to the front bumper, take them off. then take the lights off the front bumper. take the little grills out i think. then on the top there are 4 of 10mm. that should be it!

josh i will just go to your house we will do it and make a DIY right up! i will hold your hand
 
Last edited:
lol josh doesnt care about his interior....we ripped everything but the dash out last night and threw it all away. haha.
 
Devil Man said:
i just took off my front bumper in 7 min its easy, i will show you. to remove the auto seat belts you have to take off the head liner. oh and BTW for those of you who want to take off your auto seat belt, you will need to get a head liner from a s14 i belive, cause there will be a gap there where it was and it looks like shit. if you care.... i know you dont josh.

ok if you want to know how to take off the front bumper i will tell you here. first take off inner fender on both front wheels. then look in there you will see about 6 or so 10mm bolt that hold the fender to the front bumper, take them off. then take the lights off the front bumper. take the little grills out i think. then on the top there are 4 of 10mm. that should be it!

josh i will just go to your house we will do it and make a DIY right up! i will hold your hand

No need to remove the grills or lights for bumper removal.

8 10mm bolts...4 on each side. Axcessed through the inside of the fender once liner is removed. 4 10mm bolts up top, open hood and you will see them. Then 4 10mm bolts under the front of the bumper....visible from the out side, just look under. And then 4 plastic clips that hold the front bumper to the radiator support....through the big opening near the bottom.

Pull the bumper off, and unplug lights...done. Becareful when removing and installing bumper with the corners....it WILL scratch the paint on the fenders.

And s14 headliner...WTF are you talking about???
 
yeah yeah yeah i couldnt remeber it exatly.... maybe i took the grills of cause i bought those canadian fogs from tj, i think thats why i took it off. i just remeber it was cake

i cant remeber but you need a different headliner cause when you delete the auto seat belt it leaves a gap. someone who has done this has to fill in cause its been to long and i cant remeber exatly what it is that has to be done. dont kill me please
 
i don't need help removing them. they are allready removed. i just don't want to unplug anything that will leave me with any warning lights and a non running car. or a solution for unplugging all seat belt related stuff.
 
Back
Top Bottom