S14 ka in s13 overheating problems HELP

Looks like you just need to put the hose on right.
Take that fail clamp off. Put screw type clamp on. Push hose over metal more. Make sure the clamp is tightening against metal
 
thanks for the fast respond.... but i checked over everything and found out that where ever that hose connects to is spraying fluid every where.... does anyone know what that hose runs to... heater core maybe... sorry for the newbish comments but ive looked at the fsm and cant really get a grasp on where that line is going
 
Change the whole hose and put real clamps on both sides
it seems your better off taking it to a shop rather than doing it yourself.
If anyone charges you more than $100 you tell them to go screw themselves and go somewhere else.

There might even be someone on this forum willing to go to you and change it for $50.

Where are you located
 
its not that hard just pain in the ass n time consuming depending on the size of your hands.buy a hose n some clamps n get to know your car.
 
bro just follow the hose figure out what it is and where it goes and buy a new hose get a couple clamps...drain ur coolant system first so u dont get drenched in coolant when u pull off the hose....replace the hose...tighten down clamps....refill ur cooling system and make sure u bleed out all air and BAM ur done
 
You must log in or register to reply here.
Back
Top Bottom