s14 ka to s13 tranny???

[sidewayzpimpn]

Does the s14 ka fit an s13 auto tranny.......caues when i took the tranny and motor apart the middle piece...... idk wat is called im guessing the end of the crank shaft where the seal is......it doesent match the one of the s13 ka that i pulled out also the s14 ka was 5speed and has a small pin that the auto flywheel doesnt have a hole for........can i remove that pin ????? thank for any help:bigthumbu

 

[greddy2die]

if the S14 KA was originally in a manual transmission car and your putting on an auto tranny, you need to replace the pilot bearing as the auto / manual pilot bearings differ in size between the auto and manual

 

[Vas]

what he said^

 

[sidewayzpimpn]

alright igot it done already jus need to replace mounts and drop it in ...........what is the diffrence in having solid mounts or the stock ones?????

 

[steveka-t]

alright igot it done already jus need to replace mounts and drop it in ...........what is the diffrence in having solid mounts or the stock ones?????

solid mounts, basically yours cars engine wont shake or move at all, all the vibration from the engine will be distributed through out the chassi of the car, which basically means your car will shake... i would recommend sticking with stocks...