S15 Sr20DE in S13 Vert!

S

Sr20Vert

Member
Hopefully this is the right section for this if not then idk move it i guess. Big big thanks to Steve aka infected for helping me out with this project and for taking my motor swap virginity lol :bigthumbu and for being a fuckin sick ass mechanic. And big thanks to Paul and Jeramie for comin over and helping out, def couldnt have got it done so fast without you guys. I only have a few pics of the swap and ill try to post a vid soon. Shit cranked up and ran first try no problems!!! Steve if you have more pics post em up!! Anyways lemme know what you guys think!!

The new motor s15 sr20de
2011-06-21_22-31-12_683-1.jpg

Old motor coming out
2011-07-05_21-37-23_993-1.jpg

2011-07-05_21-37-41_459.jpg

Empty engine bay we discovered after getting her out a broken motor mount explains the shaking
2011-07-05_21-41-35_625.jpg

After she was in and running :D
2011-07-07_01-30-25_602.jpg
 
Awwww yea, shit ran really nice too. Now time to take it to the skidpad :driving:
 
hell yea bro it started to idle high tho im gonna give steve a call tomm its weird cause it was idling good that whole night and for most of today
 
this would be better suited in member's ride but as nkotb i don't think you have privilege to that section
 
Haha yeah yo shit was str8 I'm still surprised the way it just started up first try. Congrats man and change that fisher price fuel filter lol. But yeah next skidpad you should take it out.
 
Got a good deal on it, only 30k on it, and bc I had an s14 sr20de in it with low compression on cylinder 4 so it was easy and cheap
 
s15 sr pics

thanks to shant at aero k garage for the great deal on this sr20de
heres some pics i got
CIMG0457.jpg


CIMG0463.jpg


CIMG0459.jpg


CIMG0474.jpg


CIMG0472.jpg


CIMG0478.jpg



now this is a cheaper route then sr20det but this can be boosted like a ka24de
and get good numbers
it can also rev higher and last longer then a ka
dont let them fool you....
:driving:
 
ok so cant get a hold of steve so ill ask u guys....it was good for thurs fri sat and then sunday afternoon it made this grinding noise from the tranny more up front tho from the bellhousing area where the clutch is. I tried bleeding the slave and had no luck. It drove when i babied it down the street but when i got on it a little the noise. I came to a complete stop, went into 1st fine, revved it up a little and slowly let out the clutch and it completely lost it and started making the loud like the clutch is not engaged noise and it indeed wasnt b/c the car didnt move so i immediately pushed the clutch in and threw it in N and let out the clutch. Pushed the clutch in threw it in first and babied it back home. Im gonna pull the tranny probably tomm after work anyone have any ideas?????????????????:confused:
 
pull the rubber boot from the fork and inspect inside and make sure the fork is in place
call me on my phone it works ...
 
arent the internals in these higher compression?

high comp + high boost = bad.
 
You must log in or register to reply here.
Back
Top Bottom