Sc400 to manual clutch assembly question (Small issue)

M

MarcoJDM

Driver
Hey what's up guys! I'm the guy that put the ka 5 speed in my sc400. Car has been driving about a month and everything has been moving flawlessly except for one issue. My clutch pedal assembly was really flimsy. It would flex whenever I pushed the pedal causing the pedal to hit the floor before the clutch was engaged all the way.

We took the assembly out and added some bracing and it helped a lot but now it seems to be getting worse.

I have the 2 bolts by the master cylinder and then we added a bottom bolt at the bottom to see if it would help and it's not.

I am using an sc300 manual clutch pedal assembly and pedal. Any recommendations would be greatly appreciated guys!
 
seems like you might need to invest in another pedal. sc300 pedals are weak as it is and age doesnt help.ive read that supra ones a stronger
 
Got it fixed. There's the two bolt holes for the master cylinder. Then we added on for the bottom of the assembly. Then we found a hole on the chassis for the top of the pedal. Feels super sturdy now and drives perfect. So the only issue we've had with this entire swap is now fixed lol. So pumped.
 
You must log in or register to reply here.
Back
Top Bottom