solid subframe bushings

I use SPL parts for my ride and I stand by them, they make awesome quality parts. Stance is also a very reputable company. Either one you choose will not let you down I believe its personal preference. The SPL ones are a bit cheaper.
 
Yes just order them from the site. I have ordered all my parts from them. I even had to e-mail them and they responded back giving me an update on the parts I ordered. SPL FTMFW.
 
sweet, any comments as far as a trans mount? im tempted to get the spl one but ive seen solid aluminum ones
 
spl makes baller parts

as for the tranny mount i wouldnt get solid but thats me i have solid engine mounts and a nismo tranny mount and that setup gives enough vibration as is.
 
I have NEW energy suspension poly bushings fs if your interested. They are for a s14 but idk they might work for a s13.
DSC_0556.jpg
 
I've got the SPL solids. Amazing product, like everyone else said amazing customer service to go along with it.

Those urethane bushing will work on an s13, you just don't cut the metal insert out of the subframe before you put it in. Just burn out the rubber.
 
psssssssshhhhhhhhhhhhhhh garabage. just weld plates on both sides and drill holes through the middle!! thats what i did! super solids!!
 
Bady0Coupe said:
IS it better to put poly energy bushings and then the sub frame collars!? Or will it do the same with stock bushings!?
Click to expand...

Do you mean the full urethane bushing or just the collars? If you're doing the full bushing then you don't use the collars. Collars go on stock bushings and there's an insert for the stock bushing to help a little more.
 
spl do it. and if you need help installing them i have a proper shop. should drive in drive out no probs.

dont get a solid trans mount if you dont have solid engine mounts, you will break that shit.
 
You must log in or register to reply here.
Back
Top Bottom