Spacers & ISIS Coils

O

OsMo_

Member
yo, I been thinking about pickin up some spacers for my 89 240 and i was looking at the different sizes and I was wondering what would be a good size to go with.

I heard so much good and bad things about ISIS over all and i wanted to know whats what about their coils and the company in general

thanks for reading

Osmin
 
yo dawg like d3p3nd1n 0n wh4t k1nda wh331s u B r0k1n 1t d3p3nd5. And nahhh B ISIS 1s d4 sh1t y0
 
Oh you speak English too? That's cool. 10mm should be enough to get it a bit flusher. You'll need extended lug studs though. I've read that 7mm spacers is the most you can go on stock stuff.
 
OsMo_ said:
Now that we are using English, my last statement I said that I wanted a wider stance once i get my coils.
Click to expand...

alright bullshit aside, you don't need to rock a big spacer. I'll give you an example. 16X8 +0 pokes a tad bit. You're doing 16X6.5 +0 so do the math.

---------- Post added at 06:23 PM ---------- Previous post was at 06:22 PM ----------
David48 said:
Oh you speak English too? That's cool. 10mm should be enough to get it a bit flusher. You'll need extended lug studs though. I've read that 7mm spacers is the most you can go on stock stuff.
Click to expand...

ahem....
 
s0loWkooPi said:
alright bullshit aside, you don't need to rock a big spacer. I'll give you an example. 16X8 +0 pokes a tad bit. You're doing 16X6.5 +0 so do the math.

---------- Post added at 06:23 PM ---------- Previous post was at 06:22 PM ----------



ahem....
Click to expand...

From what I've seen, 15x7 +0 leaves something to be desired, so I guess a 10mil would be enough.
 
You must log in or register to reply here.
Back
Top Bottom