sr oil filter

Status
Not open for further replies.
s0loWkooPi

s0loWkooPi

Trolling hard since '09
Driver
give me some tips so that I don't break my ass removing it. and no, I don't have money for a relocation kit :D
 
ManPower...

Remove the intake manifold bracket. That should give you enough clearance to get in there. Next. Buy a relocation kit.
 
Rubber gloves help too if it's dry. I used to use an oil filter wrench that grabs like a scissors and went from the firewall side. I also had a greddy oil pan and fal fans which made changing oil take about 10 minutes and I didn't even have to go underneath the car. Just jacked it up enough for the drain pan and did everything from above.
 
Last edited:
just did my oil change. I remember taking off the intake bracket off when I did my swap 5 months ago so it helped out alot. I used rubber gloves too!!

Thanks for the input guys!
 
Bro let the car cool reach ur hand down there and be a man.....gawd damn u really made a thread for this
 
haha no one had the right answer for this yet. In the inner fender (front tub, above frame) there is a hole with a little plastic cap just for this reason. 3/8 12" extension and 3/8 dr oil filter claw, less than a min.
 
BILLFISHER21 said:
haha no one had the right answer for this yet. In the inner fender (front tub, above frame) there is a hole with a little plastic cap just for this reason. 3/8 12" extension and 3/8 dr oil filter claw, less than a min.
Click to expand...

we r men... we dont read directions
 
Status
Not open for further replies.
Back
Top Bottom