NAKED MIKE
Spectator
who can swap in a redtop into my S13 coupe and do intercooler piping wirring would be a plus how much?
sr swap
- Thread starter NAKED MIKE
- Start date
NAKED MIKE
Spectator
i lack the tools, knowledge, idk how to weld, and dont know how to wire lol
HellaSFLDan
Driver
you can get a remanufactured KA24DE w/ 1 yr, 12,000 mile warranty for less than a used SR just FYI
NAKED MIKE
Spectator
i wanna try the forced induction thing for a while im pretty sure that voids any warranty
HellaSFLDan
Driver
especially your wallets
Becker-Racing
Driver
dan said:
how much does that run?
HellaSFLDan
Driver
about 1700+shipping or 1400$+shipping with your core
NAKED MIKE
Spectator
ok no thread jaking plz i need to find sum one to do my swap
Ka-Tony
Spectator
Premiere Autotechniks
9874 Pines Blvd.
Pembroke Pines, FL 33024
954-499-5977 - Ask for Kevin or Nijo.
I still say you should do a lot of research and try it out yourself. Atleast swap in the Motor so you can save a few bucks. None of us were born with the skill and knowledge to swap a motor. We just tried it in our front/back yards and learned.
9874 Pines Blvd.
Pembroke Pines, FL 33024
954-499-5977 - Ask for Kevin or Nijo.
I still say you should do a lot of research and try it out yourself. Atleast swap in the Motor so you can save a few bucks. None of us were born with the skill and knowledge to swap a motor. We just tried it in our front/back yards and learned.
HellaSFLDan
Driver
do the swap yourself, send your harness to Wiring Specialties, buy a real FMIC kit from Greddy and you dont have to weld anything
take it to a shop and have some ghetto ass looking shit for probably 1000$ more.
the hardest part of the swap is changing the exhaust manifold and turbo gaskets.
take it to a shop and have some ghetto ass looking shit for probably 1000$ more.
the hardest part of the swap is changing the exhaust manifold and turbo gaskets.
rbpowereds14
Member
I can do the swap, done plenty of them. I do it in my garage and it will take me about 1-2 days as long as you have all the parts.Heres a pick of one I just finshed. If you have any questions call me 561 6851963,will work something out.
