stock firewall RHD?

D

Dr. Dooms

Driver
in an s13 is it possible to do a right hand drive conversion with the stock firewall
or so i absolutely need the firewall for the conversion?
i cant cut and weld if needed
 
You need to have the RHD firewall and the rack and pinion in order for you to steer the vehicle. You also need to swap firewalls becuase all the componets are palced on the other side of the firewall like brakebooster,clutch master cylinder and window wiper motor.

Good luck:bigthumbu
 
JDM_Of_Miami said:
You need to have the RHD firewall and the rack and pinion in order for you to steer the vehicle. You also need to swap firewalls becuase all the componets are palced on the other side of the firewall like brakebooster,clutch master cylinder and window wiper motor.

Good luck:bigthumbu
Click to expand...

i found everything except the firewall
do you have any clips that are striped down that i could get the firewall out of?
 
You need firewall.. Also Moe lol where the window motor goes is not apart of the firewall..
 
You must log in or register to reply here.
Back
Top Bottom