Tired of SAFC?? Interested in having Nistune on your setup???

Moe@240SXWarehouse

Moe@240SXWarehouse

Spectator
I'm testing waters to see who is interested in running a Nistune board on their cars. It is similar to a Hondata. It is a board that is installed on your factory ecu and is a easier way to fine tune your car. Stop using AFC or SAFC II to run on your KA-T setup or SR20DET with bigger injectors. You do not need to buy expensive EMS (Engine management system) Like AEM, HALLTECH, ETC. Run a Nistune, it is a better safer way to tune your car. and it's cheaper than a EMS.

You can have Nistune on your car setup for less than a installed AFC.

Depending on the motor and application, price can change. You will not pay retail price. This would be a group buy.

If interested pm me or post what do you think about Nistune..:bigthumbu

UPDATE!!!!!!!!!!!!!!!!!!!!!!!

Here is the list of prices for the boards according to the application/motor

Type 1 board Applications: $250.00
CR31 Skyline (RB30E)
HR31 Skyline (NICS/ECCS RB20DET)
VL/Turbo Commodore (RB30E/RB30ET)
Z31 300ZX (VG30E, VG30ET) 1984-1985, 1986, 1987-1989
A31 Cefiro (RB20DET)
J30 Maxima (VG30E)
S13 Silvia (CA18DE/DET)
S13 Stanza / 240SX (KA24E)
N13 Pulsar (CA16DE)
N13 Pulsar (CA18DE)
U12 Bluebird (CA18DE)


Type 2 board applications:$250.00

M30 Infiniti (VG30DE)
Z32 Fairlady 300ZX (VG30DETT)
[Note ECR33 RB25DET Skyline can use Z32 VG30DETT ECU with minor wire swapover]
HCR32 Skyline (RB20DET)
BNR32 Skyline (RB26DETT)
[Note BNCR33, BNR34 Skylines can use BNR32 RB26DETT ECU and O2 sensors]
U12 Bluebird (KA24E)

NOTE: Q45 (VH45DE) Works with NIStune but requires an emulator. ROM image is too big for Type 2 boards


Type 3 board Applications: $250.00

S13 180SX (SR20DET)
S13 Silvia (SR20DE,DET)
S13 240SX (KA24DE)
U13 Bluebird (SR20DET)
B13 Sentra (SR20DE)
P10 Primera (SR20DE)
J30 Maxima (VE30DE)
S14 Silvia (SR20DET) [early model]
N14/N15 Pulsar (SR18DE, SR20DE)
RNN14 Pulsar (SR20DET)
Z32 Fairlady 300ZX (VG30DETT) [Late model, except 1996 OBD-II

Type 4 board applications: $300.00

B14 NX2000 (SR20DE) [upto 1995 only]
N15 Pulsar (GA16DE)
G20 Infiniti P10 (SR20DE) [upto 1995 only]
S13 180SX "Type R" / "Type X" (SR20DET)
S14A Silvia/200SX (SR20DET)
S15 Silvia/200SX (SR20DET)
S14 240SX (KA24DE)
ER34 Skyline (RB25DET)
WC34 Stagea late [JECS ECU only] (RB25DET)
U13 Altima (KA24DE) [upto 1995 only]
Y33 Cedric (VQ30DET)

Any questions pm me


Moe
 
Last edited:
fawk! i hope u still have this when i go SR cuz im too poor for an EMS
 
SpunTek Perf said:
Is this based on the SR20 motor or other motors as well? Also it is a reflash or the ecu is opened up and chipped?
Click to expand...

It has most of the Jap-spec and USDM motor application boards. It is a chipped board.

Depending on the ecu they make a compatible board for it

Street Slider said:
fawk! i hope u still have this when i go SR cuz im too poor for an EMS
Click to expand...

I wanna place an hour pretty soon.. I just wanna see what people think of it and if they are interested we can do a group buy:bigthumbu
 
Last edited:
If this NisTune shit had Map sensors I'd be all over it like Moe on dick.
 
I have nistune, but remember you guys need the license to use the software as well.


Nistune is basiclly a daughter board that goes in place of the rom chip and you can tune and update all the cells in real time, without having to burn chips.
 
how moch for rb20 my safc didint work on it, and i want to do some tuning on it and dont want to spend a lot of $$$$
 
gsracer said:
I have nistune, but remember you guys need the license to use the software as well.


Nistune is basiclly a daughter board that goes in place of the rom chip and you can tune and update all the cells in real time, without having to burn chips.
Click to expand...

On point :bigthumbu

KeysSr said:
how moch for rb20 my safc didint work on it, and i want to do some tuning on it and dont want to spend a lot of $$$$
Click to expand...

I got two request for rb20. Will price it up for you tomorow
 
Last edited:
It depends.. If you want nudes of me I can send it with you covering my private parts. Either using your big mouth, or your two ass cheeks!!!!

Stay on topic boy!!!!!!!!!!
 
You must log in or register to reply here.
Back
Top Bottom