okay so i have the rear end and driveshaft at the house getting the axles and engine harness this week. soon i'll be getting the motor, trans and ecu...so who wants to come help me with this shit.
Turbo FC
- Thread starter HellaCaliJosh
- Start date
You know im there!
drftns14 said:
Hes in Naples with me. I dont know about sanwhiches but hes got a cute girlfirend :laugh: Haha
I have a compressor and air tools so work won't be that hard. i need a socket to take off the axles still. i guess i'll start removing more parts soon. anybody have experience with N/A to Turbo II conversions?
Charlie a.k.a. Chuck
Driver
i would but its too far.
Ricky Cash
Spectator
mazdatrix.com should help for the conversion
you need a turbo clutch and a turbo transmission
maybe new engine mounts before it goes in ?
maybe new engine mounts before it goes in ?
i have full turbo everything. but i want to buy some stuff first like mounts, bushings and have my rear steering eliminators installed and a new clutch.
JDM180 said:
PinK FTW
$350 for everything but with a bad turbo
nfs_emo_fag
Driver
hey josh since you already have to replace the turbo spend a couple of hours and port the hotside of the turbo and the wastegate, unless your going bigger? if not the porting will make a HUGH difference, especaily around 5500 all the way til redline. i was running 15psi on my old turbo and it put 250 to the wheels, but 15psi was too much for it so i got a used turbo already ported and now im only running 10psi and it pulls alot harder. o and let me know if you need some t2 brakes , i got an extra set.