sidwayssilvia
Driver
And its back to front when you do an alignment
Wobble when shifting weight
- Thread starter booster seat
- Start date
AlexTheGreat00
Driver
I used to slide on my stock RUCA and toe rods until one night at Bronson Speedway, I went to back up onto a curb to get a jack underneath my car to change tires like I always did. Unfortunately, I didn't notice my exhaust had been hanging lower since I had a straight pipe welded in to replace my cat. When I did it this time, it bent the exhaust all the way into the driver side toe rod, toeing it out about 15 degrees. I had to borrow an electric saw to cut my rear section of exhaust off and drive my sketchy 240sx 45 minutes home while howling the tires and going sideways in a straight line on one-way roads at night. Next day, installed adjustable toe rods and RUCA's, did my own alignment on an alignment machine at school and had a new exhaust welded in.
Moral of the story: don't hit curbs! By the way, wobble can be caused by worn subframe bushings. Go solid or go home.
Moral of the story: don't hit curbs! By the way, wobble can be caused by worn subframe bushings. Go solid or go home.