best internals for ka24de

S

s14drifter69

Member
I need to know what are the best camshaft, camgears for ma 240sx. I wanna rebuild the head but with good parts 1st and then do the block with good parts. please help out! and to who ever has a maf please lmk asap! thanks
 
Why don't you research i'm pretty sure this has been covered like 10 years ago.
 
What are your power goals? Are you looking for a stock rebuild or a full race built head?

Brian Crower is probably your best bet for aftermarket camshafts / springs / valves and all that. Dunno who actually makes cam gears for the KA though.
 
I wanna get at least 400hp wen I rebuild and turbo the ka. so I need good internals and imma buy the aem ems for sure! what injector do I need to make that power 550cc wil be good?
 
block internals

please guys I need your help asap im trying to get mid to best internals for my block please help me to see what I need. thanks in advance. I know what I need but I need name brand please and thanks again!
 
Well for that power goal you can get any of the top brand pistons. Pick up a set of Eagle rods they are strong enough to get you there and hold those numbers. Bc make 2 sets of cams. You do not need the V3's. Aem Ems unit. Ummm I would go with a top feed fuel rail if you are wanting a better fuel system. All of these said parts you can buy from AMS/ turbo240.com . They also sell rebuild kits. Also Jim Wolf makes camshafts too.
 
You need to do research man. Everyone can give you a whole lot of names but no one can tell you what to buy with your money because it comes down to taste and budget. With that said, look up Jim Wolfe Technology for cams and they have a titanium kit for seats, retainers and valve springs if I'm not mistaken.
 
I wouldn get anything crower cause they are as gay as richard simons.
Brian Crower is good shit and so is Jim Wolf part but hands down best rods for KA are Pauter rods, and trust me thats ususaly the weak link in the equation.

http://www.pauter.com/nissan.htm
 
Juan Henao said:
I wouldn get anything crower cause they are as gay as richard simons.
Brian Crower is good shit and so is Jim Wolf part but hands down best rods for KA are Pauter rods, and trust me thats ususaly the weak link in the equation.

http://www.pauter.com/nissan.htm
Click to expand...

Idk why you would say Crower is gay. They are billet steel and known to be quite strong.

Brian Crower has 2 different rods, basic and pro. The basics are chromoly where as the pro's are billet. IDK the origin of either but since a lot of BC parts are from china, i'd find out before purchasing.

And Boosted-Alty is correct, the ringlands are the weak link.

In any case, steering clear form the China parts (BC basic, eagle), I don't think you can go wrong with any of those rods. They're all ultra beefy, forged billet steel and good for very high hp applications.
 
You must log in or register to reply here.
Back
Top Bottom