Parts needed to replace super hicas?

X

xpinoyxmk

NKOTB
Ive been searching the forums and ive decided that i want to swap the super hicas to non super hicas. So what would i need to replace the super hicas?

Regards,
-Marc
 
there are diffrent options togo with this-
1-
s13 non hicas sub-frame (complete subframe, arms, diff)
s13 non-hicas drive shaft
s13 non hicas powersteering pump

2-
hicas elimator bar
remove the veins from the back housing of the hicas power steering pump, reassemble and plug the rear port of the pump.

which ever way u take ur gonna have to remove the powersteering lines that run under the car.

also a thought for ya the hicas subframe is beefer and stronger so you can do a hybrid swap

-use a s13 hicas subframe, swap all arms, diff from a non hicas subframe and use the hicas rear swaybar since it is thicker then the non-hicas subframe.
 
drftnR14 said:
there are diffrent options togo with this-
1-
s13 non hicas sub-frame (complete subframe, arms, diff)
s13 non-hicas drive shaft
s13 non hicas powersteering pump

2-
hicas elimator bar
remove the veins from the back housing of the hicas power steering pump, reassemble and plug the rear port of the pump.

which ever way u take ur gonna have to remove the powersteering lines that run under the car.

also a thought for ya the hicas subframe is beefer and stronger so you can do a hybrid swap

-use a s13 hicas subframe, swap all arms, diff from a non hicas subframe and use the hicas rear swaybar since it is thicker then the non-hicas subframe.
Click to expand...

all this plus you will need to get a ps cooler and also a non hicus fluid resivor... i have done this swap and its pretty strait forward...

on a side note i tried to swap over the subframe making a "hybrid" swap but it wont work unless something i over looked. either way its easy sause.
 
So i would need:
-s13 subframe
-s13 drive shaft
-s13 ps pump
-s13 ps cooler
-s13 fluid resivor

Cant keep the vlsd? Anything else im missing
 
you can keep the vlsd swap that shit over, and its imposible to find the oem ps cooler which really is just a line that runs across the sub frame, so get an aftermarket little thing and mount it somewhere to cool it.

i should have taken pictures of my car when i did this shit... but w/e
 
Also, does it have to be the dohc only or can i use the sohc parts too?

Do i have to replace the from too or just the rear?
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom