help with dash harness

B

booster seat

Spectator
ok when i got the car these plugs were all chillin not plugged into anything. it would help if someone could label them so i know where they go. thanks guys

ps.. if i get a good enough answer i'll paypal =]

3.jpg

2.jpg

1.jpg
 
why do you need them labeled? why dont you just plug them all back in where they go?? its easy they only plug to the plugs they belong to. the big fuse block goes on the driver side and you can sort the rest out from there.
 
dude no way! great idea. now.. tell me where to plug them in:

lotsofwiringworktodo.jpg


if anyone else wants to give some useful info that would be nice. im trying to eliminate all the wiring i dont need. i only need power doors, gauge cluster, lights, wipers. i want to get rid of all the wiring for everything else. i've already done some but i need these plugs labeled so i can get rid of them or not
 
seriously? you dont know which connectors go to which?? there is only like 6 things that go there, you have glove box light, a/c controls, a/c system, radio, cig lighter, ebrake, and center console light.

the ones right above the steering wheel are obvious, controls your lights hazards wipers cluster etc.

why are you removing them? instead of risking shorting your harness and ecu out why dont you just wrap all the unused connectors with electrical tape ... unless you are trying to save weight? lol
 
i have my steering column wires labeled already. i really only need to know which plugs go to the buttons by the steering wheel like hazard lights.. cuz i know without that the turn signals wont work. idk what the other buttons are cuz they weren't in the car. once i know that i'll know which are left over for ac, radio, etc.

its a project/drift car/saving weight thing. idk everything about wiring a car so im teaching myself. the same way i've learned everything else about my cars. just need a little help on identifying these plugs.
 
booster seat said:
i have my steering column wires labeled already. i really only need to know which plugs go to the buttons by the steering wheel like hazard lights.. cuz i know without that the turn signals wont work. idk what the other buttons are cuz they weren't in the car. once i know that i'll know which are left over for ac, radio, etc.

its a project/drift car/saving weight thing. idk everything about wiring a car so im teaching myself. the same way i've learned everything else about my cars. just need a little help on identifying these plugs.
Click to expand...

sorry but no one here is gonna spoon feed you the answers!

do yourself a favor and go download the FSM(factory service manual)

it has pictures, just incase u cant read, it will show u where each plug goes, the wiring for them, pinouts, etc. everything u will need to know to figure out where the plug goes. stop being lazy and research it.

here-

http://forums.nicoclub.com/zerothread/311075

now... paypal-datboicamron@hotmail.com
 
i'v been researching this was my last resort.. if you think about it.. it is easier to research than to take pictures.upload pictures. host pictures, post them and have all these pointess conversations. i think google is easier which was my first choice. it doesn't help much when the plugs are not in their repected positions does it? and i already have the fsm but again the diagrams tell you what they are when they're in place. mine are not in place.

it would take someone 2 minutes to label these pictures if they had experience. you obviously dont so go away
 
you dont have any of the dash buttons??? like the hazards or headlight return ??? the ones that are over your transmission tunnel are for the ebrake, cig lighter, light for the center console... if you have your gauge cluster harness, 3 plugs, plug them in, all the rest of the stuff to the right is mainly a/c (usually blue) and radio stuff and the plug for the light in the glove box. one of the ones that are covered with the lil rubberplastic cover shit(might be black) goes to the wipers. hard to tell you exactly what every single one is without having a car to look at and double check, just giving you the best i can by memory.
 
Last edited:
booster seat said:
i'v been researching this was my last resort.. if you think about it.. it is easier to research than to take pictures.upload pictures. host pictures, post them and have all these pointess conversations. i think google is easier which was my first choice. it doesn't help much when the plugs are not in their repected positions does it? and i already have the fsm but again the diagrams tell you what they are when they're in place. mine are not in place.

it would take someone 2 minutes to label these pictures if they had experience. you obviously dont so go away
Click to expand...

wtf is wrong with you?

why do u refuse the help your asking for?

i already explained it, the fsm shows u the connector end, how many prongs and what wires run to and from that connector. that alone will allow u to identif the connector and what it goes to.

kid if you can manage to do that then you shouldnt be mess around with cars.

also taken some shit pics of a chassis harness and expecting someone to guess at where a plug goes is a fucking joke.

NO ONE HERE IS GONNA HELP YOUR LAZY ASS

open the fsm and figure it out like everyone eles

or

like explained before aswell, lay the harness across the dash bar and "TRY" to plug shit together. if it fits guess what? IT CORRECT! if it doesnt try another one!

serious kid stop bein lazy and do work
 
bro.. if i had things to plug them into i would.. if u look at the pic.. i have the blinker switch plugged in. so i know where that plug goes. thats all i have to plug in. so i cant try your 'fit it in the hole' methods.

i took the other picture to show you that i dont have anything in the car to try plugging things into.

i looked at the fsm and i couldnt find many descent pictures of plugs themselves and the amount of pins/shapes/etc

i'll keep looking but i still think it would be easier for someone that already knows where they go to tell me..
 
booster seat said:
bro.. if i had things to plug them into i would.. if u look at the pic.. i have the blinker switch plugged in. so i know where that plug goes. thats all i have to plug in. so i cant try your 'fit it in the hole' methods.

i took the other picture to show you that i dont have anything in the car to try plugging things into.

i looked at the fsm and i couldnt find many descent pictures of plugs themselves and the amount of pins/shapes/etc

i'll keep looking but i still think it would be easier for someone that already knows where they go to tell me..
Click to expand...

well I can honestly say that I dont think anyone here knows what they go to unless they have their shit apart too but I wish you goodluck. put it this way, if your power windows are plugged in, and your wipers, and your hazard switch, just get your cluster plugged in and delete all the other wires
 
dan said:
well I can honestly say that I dont think anyone here knows what they go to unless they have their shit apart too but I wish you goodluck. put it this way, if your power windows are plugged in, and your wipers, and your hazard switch, just get your cluster plugged in and delete all the other wires
Click to expand...
I do. But I'll label it for a price. :)
 
ok people.. all i need is a picture of the plugs for the buttons near the steering column. if someone can do that for me that would be awesome.
 
You must log in or register to reply here.
Back
Top Bottom