sr warming up issue

R

rubez

Member
when i start it up it wants to die out and cant hold an idle and wants to bog out, but once it is warm like 10 -15 mins later its straight no problems. has any one had this problem with their sr and is their a fix???? please help
 
its called cold start problem... let me know when u find the problem please :) ...and fuel pump have nothing to do with it
 
rubez said:
when i start it up it wants to die out and cant hold an idle and wants to bog out, but once it is warm like 10 -15 mins later its straight no problems. has any one had this problem with their sr and is their a fix???? please help
Click to expand...

Have you tried adjusting your idle air control valve? TPS?
 
rubez said:
Why would I have to change that it idles perfect and runs fine after like 10 mins
Click to expand...

I've seen many cold start idle problems relate back to dirty/clogged/bad IACV, or vacuum to IACV or poorly set IACV. I've seen TPS's cause idle issues. There's also the possibility that you are having timing issues (in which case you should make sure the tps is calibrated anyway) or general vacuum leak issues. Maybe its in your FIC (oring or thermal element).
 
1. check for vacuum leaks.

2. Is your BOV venting to atmosphere? RECIRC might help that out. I've never had a properly running SR give any issues with recirculating (lack thereof for that matter), but it knocks one item out of the equation if you have other issues.

3. You have proper grounds to the engine?

+1 to what Tonymac said.
 
thanks for the assistance men, and thanks tony for clearin that up!! +1 for the both of you. ill look at it shortly and u give u guys some feedback
 
You must log in or register to reply here.
Back
Top Bottom