need to dyno tune my sr

RADIR

RADIR

Driver
i need someone who can tune my sr i got emphaty tuned ecu ,z32maf,precision turbo top mount setup i want a dyno tune
 
no its not but i just put new bearings on and it was set for 18psi before and i just want to make sure its runs right
 
Then just go to a dyno and get an af readout. There's no reason to waste your money on a retune if you don't need it. If you do, you can contact Martin (tuner for RS Enthalpy) directly through zfever in tampa - he can dyno tune your roms but will probably tell you teh same thing i just did.
 
the reason i wanted to tune cause i was running on 15psi till i got a feel of the car i had a stock ka before and the sr was set up for 18psi so just turn the boost up and call it a day ?
 
Yeah. You should have no problem running more boost assuming your tune is correct for your setup.
 
so on my nunook tune i can go from 16 to 18... only thing is im running perty rich, wanna know why.....
 
im always rich.... pretty ridiculous too, like smokes at stop a little (not white smoke, black cuz its that rich, prolly a little carbon) and when it hits boost it dumps a lasting cloud of black smoke. it runs hard but its really rich. its so rich i can foul out plugs sometimes!
 
so then you get an adjustable fpr and a wideband and lean it out until you're happy w/ the a/f.
 
That's how most people "fine tune" their rom tunes. If you have an safc, that would be even better.
 
You must log in or register to reply here.
Back
Top Bottom