2jz no s**t wont start

the throttle body coolant hose runs within the metal of the throttle body not inside of it.
How did you get coolant in there?
The only way is if you mixed up the nipples for the throttle body coolant and the vacuum hose for the power steering.
Also those coolant lines are also connected to your Idle Air control valve. Check that out to see if maybe they are leaking.
 
Last edited:
Drft_Lock said:
the throttle body coolant hose runs within the metal of the throttle body not inside of it.
How did you get coolant in there?
The only way is if you mixed up the nipples for the throttle body coolant and the vacuum hose for the power steering.
Also those coolant lines are also connected to your Idle Air control valve. Check that out to see if maybe they are leaking.
Click to expand...

theres two coolant lines that run to the throttle body. i was taking the throttle body off to look at the injectors and i took the coolant hose off to the throttle body and it sprayed all over the middle where the spark plugs are...
 
PB&J said:
Just sayn if u have to explain where #1 cylinder is to sumone, den ur def not gonna,want them helpn u diagnois u problem....
Click to expand...

okay do you have another reason for posting like any suggestions or do you just want to be the douche to point out stupid shit.
 
turns out it was a distributor wire plugged in wrong. basically all my plugs are broken so each wire is individual plugged into each sensor. motor wont idle by it self tho so i gotta get new sensors, i know iacv is messed up and i proble have to adjust tps. then i can set timing. not much left to do. :)
 
You must log in or register to reply here.
Back
Top Bottom